Products/Order

AK47 80% Receiver Blank and Romanian

$37.00 on .040 4130 steel
$40.00 on .064 4130 steel
Picture represents blank on .040, blanks on .064 will not come with x and y dimples

Krinkov Receiver Blank

$37.00 on .040 4130 steel
$40.00 on .064 4130 steel
Pictured is our Krinkov Sidefolder on .064

AMD63 or AMD65 80% Receiver Blank

$37.00 on .040 4130 steel
$40.00 on .064 4130 steel
*Please specify AMD65
or AMD63 upon ordering

Pictured here is our AMD65

$50.00 on .064 4130 steel
Stiffening plates are included with this blank

RPK or RPK Underfolder Receiver Blank

$40.00 on .064 4130. This blank comes in this thickness only. This blank is different from the Yugo blank.

Polish or Russian Underfolder Receiver Blank

$37.00 on .040 4130
$40.00 on .064 4130
Please check your trunnion type shown
to the below and be sure which
blank you need.

$12.00 to $14.00 per set. Our rails are rough rails and can be used with any thickness blank. But they are especially useful with the thicker material blanks. They come in three styles, standard AK style, PSL/Romak III, and the AR70

$9.00 each. These are used in place of the retaining spring that comes with most kits out there. They are especially useful and helpful for the thicker material blanks as they grab a lot more material than the spring.

$40.00 on .064 4130. These blanks are offered in only this thickness.

PPSH41 Full Length 80% Receiver Blank

PPS43 Receiver Blank

To finish this blank purchaser would need to do the following: Weld bottom of the ventilated handguard together,enlarge ventilation holes on the barrel shroud, install the barrel support, trunnion and front plug of the barrel jacket, cut the ejector port and bolt slot.

$140.00 on .071 4130 steel

Available for order $50.00 each

MISCELLANEOUS PARTS:

Rivet Sets-ON BACK ORDER
Templates-$7.00 per template(when not purchasing a blank)
Blueprints- $15 and up (when not purchasing a blank)
PPS43 Trunnion Stabilizer-$15.00 each
Scrap Steel Bundles -$10.00 each

Tantal Receiver Blank

$37.00 on .040 (only sold in this thickness)

TO PURCHASE/ORDER PLEASE ENTER THE STORE BY CLICKING THE ENTER STORE BUTTON BELOW:

$160.00 .071 4130 steel only

Yugo or Yugo Underfolder 80% Blank

Available for $140.00 on .071 steel. Full length receiver blank.

**************
NEWEST PRODUCTS

for our newest or our coming soon parts please see our NEWS page!
****************
INFO ON MG42:

MG42 80% Receiver Blank made on 4130 .100 sheet steel. 18" long. Channels will need to be opened. All recesses are pressed in.
This is the back portion of the receiver measuring from the shoulder stock forward to the barrel door.
$300.00
*six to eight weeks for delivery of blank.
***************
Back by popular demand:

Scrap 4130 bundle for practice welding and spot welding, etc. available for $10.00 a bundle. See shopping cart for details.
****************
Return Policy:
Because all of our products are made custom we offer the following guarantee:

All of our
products are guaranteed buildable or will be replaced or exchanged at no cost.

We have built our business on our strong commit-
ment to our customers and dedication to our products and their quality.

Because of the custom nature of these blanks, return for any other reason is subject to a 20% restock/
resell charge

MG42 80% Receiver Blank

NEW STEYR MPi-69 RECEIVER BLANK MADE FROM 4130 .050 SHEET STEEL
$55.00 EACH

PPS43, PPSH41 and KP44 trunnions

PKM 80% RECEIVER BLANK $350
on 4130 .080 steel, comes with bottom bulge and charging handle slot with backing and finishing cover. Comes with 1/4" thick backing steel over the trigger housing for semi auto

AR70 80% RECEIVER BLANK

$300.00 on .100 4130
sheet steel

NEW PARTS INFORMATION/PRICING:
*parts made in original i.d. unless otherwise request (on relevant parts)

STEN MARK II, STEN MARK III,
STEN MARK V RECEIVER BLANKS $50.00

M3A1 Grease Gun Receiver Blank on 4130
seemless tubing steel with the charging handle slot cut $55.00
Picture Coming Soon!

VZ58 Receiver Blank made on .040 4130 STEEL.
*THIS IS THE SHEET METAL VERSION OF THE
MILLED RECEIVER BLANK $55.00

SWEDISH K Receiver Blank made on 4130 seemless tubing steel.
Charging handle cut. $55.00
Picture Coming Soon!

CZ-26 Receiver Blank made on seemless
4130 with endcap threads.
This is a full length receiver blank $150.00

YUGO M56 Receiver Blank made on
4130 tubing steel
This is full length. $55.00

FBP-9 Receiver Blank made on 4130
seemless tubing steel with the
charging handle slot cut.
This is full length. $55.00

Picture Coming Soon!